Cosmetic tube packaging / 079-PAN-SLT
Custom 15–20 ml Eye Cream Tube with Plastic Applicator
Panpac branding concept based on the supplied reference. Approve the actual pack before production.
Product Overview
The moulded plastic head gives a small eye-care tube an integrated application surface. Approve the contact feel and outlet with the formula in place; a dry sample cannot show how much gel collects at the tip after dosing.
Use this format for eye cream, eye gel, targeted serum. Check applicator parting lines and finish against an approved sample. Use the actual eye cream to confirm a repeatable dose and clean cap seating.
For a custom printing quote, send the target fill, artwork count and preferred finish together. This lets the sleeve, closure and decoration be reviewed as one pack before a printed sample is ordered.
Full Specifications
| Item | Reference and order confirmation |
|---|---|
| Packaging format | Plastic applicator eye cream tube |
| SKU | 079-PAN-SLT |
| Reference fill | 15–20 ml reference |
| Sleeve and materials | ABL in filename, unconfirmed by source title; plastic head reference |
| Closure and outlet | Plastic applicator and protective cap |
| Tube diameter / length / orifice | Confirm from signed drawing |
| Tail condition / sealing window | Agree with filler after trials |
| Temperature and pressure limits | No rating supplied; agree test method and limits for the intended conditions |
| Compliance and certificates | Request documentation for the exact pack and destination |
| MOQ | Quote by size, print and closure |
| Lead time | Confirm sample, approval and production dates separately |
Key Features
- Feel for raised moulding lines on the tip
- Check the outlet and cap after dispensing
- Inspect the head for movement after repeated use
Applications
For a light eye gel, check whether the head releases too much at first squeeze. For cream, check whether the intended dose spreads without building up under the cap.
For orders to Central Asia, Russia, the Middle East, Africa or Latin America, state the destination and any packaging document requirements when requesting a quote.
Quality & Material Test
Identify the moulded plastic applicator and cap grades. Inspect parting lines, head retention and contact feel on the assembled pack.
| Material grade and contact parts | Confirm each component separately. Use food-contact or cosmetic-grade wording only if documentation supports the exact grade and intended use. |
|---|---|
| Material declarations and reports | Specify the exact construction, colour and batch or sample reference. Request available declarations or agree additional testing before ordering. |
| Heavy metals and migration | Agree the analytes or migration scope, sample configuration, test conditions and destination requirements first. Existing reports must cover the requested material or finished pack. |
| Appearance and functional approval | Inspect the sleeve, print, cap and applicable dispenser against the signed sample. Agree checks for leakage, dose, rubbing and closure fit as relevant. |
Surface Finishing Options
Keep decoration clear of the tip and use the approved cap-facing direction to position the small wordmark.
| Screen printing and hot foil | Review screen print for solid logos and text; request gold or silver foil proofing where the sleeve, print zone and artwork support it. |
|---|---|
| UV spray, frost and colour spray | Review available finishes for the actual sleeve or cap substrate. Confirm flex, adhesion and appearance on a formed sample. |
| Electroplating and embossing | Consider only for a suitable component. Confirm plating or metallisation method for the cap; moulded relief may require new tooling. Avoid assuming the same process fits a flexible sleeve. |
Packaging & Shipment
Protect moulded tips against impact or cap displacement; pack with the protective cap in place if agreed.
| Individual protection and inner boxes | Quote individual PP bags where suitable for the finish, plus inner boxes or dividers for decorated sleeves and caps. Confirm counts and whether closures ship fitted or separately. |
|---|---|
| Export cartons and pallet option | Agree export carton strength, pack orientation, pallet pattern if required, and outer labels by SKU and artwork. |
| Sea shipment preparation | Agree moisture protection and handling for the intended route. Review a packed sample for rubbing, deformation or damage under the proposed stack. |
Buying Notes
| Sample policy and timing | Ask for separate dates and charges for stock samples, decorated pre-production samples and samples requiring a new mould. |
|---|---|
| MOQ tiers | Request tiers per size, sleeve or cap colour and artwork. Ask which combinations can share a production run. |
| Custom tooling | Confirm stock tooling versus a new mould, drawing approval, trial schedule, ownership and maintenance in the quote. |
| Colour and artwork | Send vector artwork, colour references and the current dieline. Agree print-safe areas and an assembled colour sample before release. |
| Lead time and warranty | Agree when production lead time starts, the dispatch window, the approved inspection standard and the written claim or replacement terms. |
Frequently Asked Questions
What should I inspect on the plastic applicator?
Confirm edge finish, tip retention, outlet cleanliness and the intended contact materials on assembled samples.
Can I approve the head using a blank tube?
Use the blank tube for appearance only. Confirm head retention, product flow and cap cleanliness on an assembled, filled sample.
What should I send with my RFQ?
Quote reference 079-PAN-SLT. Include the target fill, quantity per artwork, formula type, filling method and destination country. State any required documents and delivery date so sample and production schedules can be quoted separately.
Related Products
