Cosmetic tube packaging / 085-PAN-SLT
Custom Airless Cosmetic Pump Tube for Cream and Lotion
Panpac branding concept based on the supplied reference. Approve the actual pack before production.
Product Overview
For this cream pump tube, begin with the target dose and fill rather than the catalogue size range. A pump selected for a light lotion may struggle to return or dispense consistently with a thicker hand cream.
Use this format for hand cream, body lotion, bb cream. Match the pump and sleeve to the selected fill rather than assuming one pump fits the whole range. Check return, output repeatability and residue near end of use.
For a custom printing quote, send the target fill, artwork count and preferred finish together. This lets the sleeve, closure and decoration be reviewed as one pack before a printed sample is ordered.
Full Specifications
| Item | Reference and order confirmation |
|---|---|
| Packaging format | Airless cosmetic cream pump tube |
| SKU | 085-PAN-SLT |
| Reference fill | Confirm nominal volume and target fill weight separately |
| Sleeve and materials | Confirm sleeve, actuator and pump wetted parts |
| Closure and outlet | Vacuum pump reference with clear protective cap |
| Tube diameter / length / orifice | Confirm from signed drawing |
| Tail condition / sealing window | Agree with filler after trials |
| Temperature and pressure limits | No rating supplied; agree test method and limits for the intended conditions |
| Compliance and certificates | Request documentation for the exact pack and destination |
| MOQ | Quote by size, print and closure |
| Lead time | Confirm sample, approval and production dates separately |
Key Features
- Confirm actuator and wetted parts by size
- Record missed doses and slow return during the trial
- Check residual product and cap cleanliness at the end
Applications
For hand cream, check repeat dispensing at the lowest expected storage temperature. For body lotion, check whether the delivered amount and outlet cleanliness suit everyday use.
For orders to Central Asia, Russia, the Middle East, Africa or Latin America, state the destination and any packaging document requirements when requesting a quote.
Quality & Material Test
Confirm the pump mechanism and contact materials by size. Compare repeat dose and actuator return with the intended cream or lotion.
| Material grade and contact parts | Confirm each component separately. Use food-contact or cosmetic-grade wording only if documentation supports the exact grade and intended use. |
|---|---|
| Material declarations and reports | Specify the exact construction, colour and batch or sample reference. Request available declarations or agree additional testing before ordering. |
| Heavy metals and migration | Agree the analytes or migration scope, sample configuration, test conditions and destination requirements first. Existing reports must cover the requested material or finished pack. |
| Appearance and functional approval | Inspect the sleeve, print, cap and applicable dispenser against the signed sample. Agree checks for leakage, dose, rubbing and closure fit as relevant. |
Surface Finishing Options
Review print or spray options on the sleeve only after the cap and pump combination is fixed. Check that coating does not interfere with closure fit.
| Screen printing and hot foil | Review screen print for solid logos and text; request gold or silver foil proofing where the sleeve, print zone and artwork support it. |
|---|---|
| UV spray, frost and colour spray | Review available finishes for the actual sleeve or cap substrate. Confirm flex, adhesion and appearance on a formed sample. |
| Electroplating and embossing | Consider only for a suitable component. Confirm plating or metallisation method for the cap; moulded relief may require new tooling. Avoid assuming the same process fits a flexible sleeve. |
Packaging & Shipment
Use protective covers or an agreed insert to prevent actuator movement in the carton.
| Individual protection and inner boxes | Quote individual PP bags where suitable for the finish, plus inner boxes or dividers for decorated sleeves and caps. Confirm counts and whether closures ship fitted or separately. |
|---|---|
| Export cartons and pallet option | Agree export carton strength, pack orientation, pallet pattern if required, and outer labels by SKU and artwork. |
| Sea shipment preparation | Agree moisture protection and handling for the intended route. Review a packed sample for rubbing, deformation or damage under the proposed stack. |
Buying Notes
| Sample policy and timing | Ask for separate dates and charges for stock samples, decorated pre-production samples and samples requiring a new mould. |
|---|---|
| MOQ tiers | Request tiers per size, sleeve or cap colour and artwork. Ask which combinations can share a production run. |
| Custom tooling | Confirm stock tooling versus a new mould, drawing approval, trial schedule, ownership and maintenance in the quote. |
| Colour and artwork | Send vector artwork, colour references and the current dieline. Agree print-safe areas and an assembled colour sample before release. |
| Lead time and warranty | Agree when production lead time starts, the dispatch window, the approved inspection standard and the written claim or replacement terms. |
Frequently Asked Questions
Is the listed capacity range enough to choose a pump?
No. Confirm the actual size, formula viscosity and filling method; request a tested assembly for that combination.
Can the same pump be carried over to another tube size?
Confirm the mating dimensions and filling procedure, then repeat the functional trial with the new assembly.
What should I send with my RFQ?
Quote reference 085-PAN-SLT. Include the target fill, quantity per artwork, formula type, filling method and destination country. State any required documents and delivery date so sample and production schedules can be quoted separately.
Related Products
