Product Categories
Request a Quote
Tell us what you need. Our team can review your packaging requirements.
info@panpacpack.com
+86 13232909611
Hot Products
Home / Fragrance Packaging / Perfume Spray Pumps
Wholesale Perfume Spray Pumps
Already have a bottle or a pump you want to replace? Send the neck drawing or your current parts. Tell us how the pump is fitted and whether you need a collar and cap with it. For a new bottle, approve the tube length and spray on the assembled sample before placing a bulk order.
Perfume Spray Pump Collection
Compare pumps by mounting type and neck finish. For a bulk quote, send the pump reference, quantity and finish. Specify whether you need the pump on its own, with a collar, or with both the collar and cap.
Looking for a specific model or finish? Ask for available options and samples.
Match the Pump to Your Bottle Neck
Check how the pump attaches before comparing the neck size. An FEA 15 crimp pump and an SNI15 screw-on pump are designed for different neck finishes. If you are replacing a sprayer, send both the bottle-neck drawing and the existing pump reference.
| Mounting type | What to send | What to check on the sample |
|---|---|---|
| Crimp | Bottle neck drawing, pump model and crimping head reference | Ferrule fit after crimping and seal on the assembled bottle |
| Screw-on | Full thread specification or matching bottle and pump samples | Thread engagement, seating and seal |
| Snap-on | Neck profile and the pump assembly drawing | Fit and retention after pressing the pump onto the neck |
Spray Dosage, Mist and Dip-Tube Length
Dosage is the amount sprayed per press. A lower dose can still feel wet if the spray is concentrated. Compare pumps with your actual fragrance after priming, then check the spray pattern and the consistency of several presses.
Check the dip tube on the assembled bottle. A tube can reach too far into a thick or sloped base and bend, or sit too high and leave fragrance behind. Send the bottle drawing or a sample and confirm the tube length using the pump drawing’s measurement points.
Collars, Caps and Surface Finishes
If you are matching a gold, silver or black pump to an existing cap, send a physical finish reference. Review the pump, collar and cap together. A polished collar and a matte cap can look different even when both are ordered in the same colour.
On the assembled sample, look at the gap above the bottle shoulder and whether the collar covers the ferrule as intended. Fit the cap and check that it closes without touching or pressing the actuator.
Sample Approval and Quality Checks
Before the bulk order, record the components you approved so your filler can repeat the setup. Keep the bottle-neck drawing revision with the pump model, tube length, finish and matching collar or cap references.
- Fit and finish. Check the assembled height, fit at the neck, collar seating and clearance inside the cap.
- Test with your fragrance. Agree who will check priming, repeated spraying and sealing, and record the conditions used for the sample test.
- Export packing. We separate similar models and protect actuators and decorated collars from contact and rubbing in the carton. Confirm how you want the parts grouped for receiving.
Related Fragrance Packaging Guides
Read PANPAC’s fragrance packaging guides for help checking bottle necks, matching caps and approving a complete assembly.
Perfume Pump Assembly and Spray Trials
Perfume Spray Pump FAQs
Will an FEA 15 crimp pump fit my 15 mm perfume bottle?
Check the full neck specification on your bottle drawing. If it is FEA 15, review the pump drawing and your crimping head, then confirm fit and sealing on an assembled sample.
Can I replace a crimp perfume pump with a screw-on pump on the same bottle?
A screw-on pump requires a matching threaded neck. Check the existing bottle drawing before choosing a replacement. If the bottle is designed for crimping, keep a compatible crimp pump or choose a threaded bottle for the screw-on pump.
How do I measure the dip tube length for my perfume bottle?
Use the reference points on the pump drawing when you record the length. Fit the sample pump to the actual bottle and check where the tube ends relative to the inner base, especially on a thick or sloped base.
Why does a fine-mist perfume pump spit or skip on the first spray?
Note whether the pump has already been primed and whether the spray settles after several presses. Check the dip-tube connection and assembly, then repeat the trial with the fragrance you plan to fill.
How do I check whether my perfume cap will clear the spray actuator?
Fit the pump and collar to the intended bottle. Compare the height of the assembled pump with the cap’s internal clearance, then put the cap on and confirm it does not touch or press the actuator.
Request a Packaging Quote
Share the bottle-neck drawing or current pump reference, quantity, intended dosage and finish. Tell us if you also need the collar and cap.